The Right Saw For The Job
Spancrete Saws are used to cut the hollowcore to the desired length after the concrete is cured. Certain saw models are capable of sawing angles from 0-180 degrees. The Saws are fully adjustable to perform well in each specific environment.
4-Foot/1.2-Meter Bed Saw
The Spancrete Bed Saw rides directly on the slab, allowing for multi-level stack casting. It is capable of performing 90-degree cross cuts, and is designed with an automatic cutting cycle after it's manually aligned to the cutting location.
Dimensions (LxWxH) | 8.2 ft (2.49 m) x 6.3 ft (1.93 m) x 5.6 ft (1.73 m) |
Weight | 4,200 lb (1,900 kg) |
Saw Motor | 40 HP @ 480 V (32 HP @ 380 V) |
Bridgesaw
Capable of performing 90-degree cross cuts, and left or right angle cuts up to 89-degrees on a casting bed, the Spancrete Bridgesaw rides directly on the same rails as a gantry.
Dimensions (LxWxH) | 11.4 ft (3.48 m) x 39.3 ft (12 m) x 9 ft (2.74 m) |
Weight | 28,000 lb (12,750 kg) |
Saw Motor | 32 HP @ 480 V (32 HP @ 380 V) |
Multi-Angle Saw
The electric-driven Spancrete Multi-Angle Saw can run in manual or fully automatic. It is appropriae for slabs with a height of up tp 21.7 inches (550 mm) and width up to 48 inches (1.2m).
Dimensions (LxWxH) | 18.7 ft (5.7m) x 7.4 ft (2.25 m) x 9.2 ft (2.8m) |
Weight | 15,400 lb (7,300 kg) |
Saw Motor | 75 HP (55kW) |
Leveler Saw
The Spancrete Leveler Saw rides directly on the casting beds and has a low-profile design that also allows cutting while casting in adjacent casting beds. It is designed to perform 90-degree cross cuts and can also be fitted with a reveal blade with an optional accessories package
Dimensions (LxWxH) | 13.3 ft (4.06 m) x 12.0 ft (3.66 m) x 7.4 ft (2.26 m) |
Weight | 8,500 lb (3,900 kg) |
Saw Motor | 40 HP @ 480 V (32 HP @ 380 V) |
Radial Arm Saw
The Spancrete Radial Arm Saw rides directly on the slab and is capable of performing 90-degree cross cuts, and left or right angle cuts up to 45-degrees on the casting bed.
Dimensions (LxWxH) | 18.5 ft (5.64 m) x 5.4 ft (1.65 m) x 8.7 ft (2.64 m) |
Weight | 11,400 lb (5.171 kg) |
Saw Motor | 75 HP @ 480 V (60 HP @ 380 V) |
Crosscut Saw
The Spancrete Crosscut Saw is built to ride directly on the same rails as the Spancrete LP240 Slipformer, allowing for fast, accurate cross cuts. It can also be fitted with a reveal blade with an optional accessories package.
Dimensions (LxWxH) | 7.5 ft (2.29 m) x 14.6 ft (4.45 m) x 7.1 ft (2.16 m) |
Weight | 11,000 lb (4,990 kg) |
Saw Motor | 40 HP @ 480 V (32 HP @ 380 V) |