Ancillary Equipment

Ancillary Equipment Ancillary Equipment

Creating precast products takes more than just one machine.

The production of prestressed concrete elements requires many accessories, consumables and spare parts. All the ancillary equipment needed is available for Spancrete. With more than 70 years of precast expertise, our parts and service team is by your side; protecting your investment and ensuring success for years to come.

In addition to machines that create key product components, Spancrete offers a variety of additional tools to help manufacturers extend their product offerings and add efficiencies in their plants. Spancrete carries genuine OEM parts for our machinery and ancillary equipment, helping manufacturers create precast products around the world.

"Working with Spancrete has been a good experience. Not only their service, but the continual education they provide." - KIE-CON Inc. (U.S.A.)
DIAMOND CUTTING BLADES

DIAMOND CUTTING BLADES

Diamond Cutting Blades are used to cut prestressed concrete elements with special sawing machines. The diameter of the blade used must be chosen according to the thickness of the element to be cut.

BED CLEANER

BED CLEANER

Helping to ensure quick turnover, the Spancrete Bed Cleaner quickly removes debris and water between production cycles. Running at a drive speed of 0-4 miles per hour (0-6.5 km/h) it can cover up to 56,000 square feet (5,200 m2) in an hour.

TENSIONING JACK

TENSIONING JACK

Spancrete’s Tensioning Jack has 60-inches (152 cm) stroke for 1/2-inch (12.7 mm) strand. A "Y"-chain sling is included for easy manipulation into strand, a magnetic torpedo level is included to make sure the unit is level and an anti-twist bar on the pulling yoke can be used to measure elongation.

BUCKET SYSTEM

BUCKET SYSTEM

With a mix capacity of 3 cubic yards (2.3 m3), the Spancrete Bucket System is air operated with a clam shell style and features a bottom discharge.

REMOTE BUCKET SYSTEM

REMOTE BUCKET SYSTEM

The Remote Bucket System allows the clam shell discharge gates to be operated remotely. There is no need to attach auxiliary air, resulting in safer operation.

SUCTION MACHINE

SUCTION MACHINE

The Spancrete Suction Machine helps increase productivity when a lot of openings need to be created in wet concrete. It features two concrete waste buckets, allowing the machine to run continuously without stopping when the first bucket is filled.

TILT TABLES

TILT TABLES

Used for manufacturing precast concrete wall panels, Spancrete Tilt Tables can be manually or hydraulically operated. Tables can tilt up to 75-degrees, and are available in five standard sizes, or can be custom manufactured.

COLUMN FORMS

COLUMN FORMS

Spancrete manufactures a variety of concrete forms for column applications.

BEAM FORMS

BEAM FORMS

Spancrete manufactures a variety of concrete forms for beam applications.

STEEL EXTRUDER CASTING BEDS

STEEL EXTRUDER CASTING BEDS

Steel Extruder Casting Beds are made from precision engineered modules consisting of the base, side edges and rails to carry the production machinery, and are reinforced longitudinally and transversely along the entire length of the bed. The casting beds can be configured for heating to accelerate curing.

STAIR FORMS

STAIR FORMS

The Stair Form from Spancrete is fully adjustable with a plate surface coated with an oxide layer for corrosion protection. It is a nine step form, with a riser angle of 90-degrees.

HOOK MACHINE

HOOK MACHINE

The Spancrete Hook Machine can be partial or full automatic. It is used for placing lifting hardware in a fresh slab.

BATCH PLANT

BATCH PLANT

Spancrete can custom design a concrete Batch Plant to meet your production needs for today and account for expansion capabilities for the future.